Hexagon nut
DIN 934, steel I8I, hot-dip galvanised (TZN)
DIN 934/8 M8 HDG 6H
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M8 |
Thread type x nominal diameter x pitch (D) | M8 x 1.250 |
Height (m) | 6.5 mm |
External drive (s) | WS13 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Hexagon screw, full thread
End component for DLP-S cable channel
Hexagon socket screw, cylinder head
Lock washer, type B
Lens for indicator light Harmony XB5
Enclosed industrial luminaire Damp Proof Slim Value, IP65
Circuit board support TRTCBS
Slotted screw cylinder head DIN 84
Hexagon socket screw, flat round head, flange
EMC LOCKNUT MS PG EMC, brass nickel plated