Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934/8 ZP M12
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M12 x 1.75 |
Thread type x nominal diameter (D) | M12 |
Height (m) | 10 mm |
External drive (s) | WS19 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt, full thread
Motor protection switch MS116
Office luminaire Linear IndiviLED Direct
Circuit board support TRMDLSP1
Adapter Exxact Actassi coax
Suspension hook SH, Unipro
Signal cable FLEX-JZ
Rotary dimmer UNI400LED 4-400 W RCL UK, flush Exxact
Surface-mounted luminaire IP44 Surface Circular 350 Sensor
Mount terminal block 221 WAGO