Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934/8 ZP M14
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M14 |
Thread type x nominal diameter x pitch (D) | M14 x 2 |
Height (m) | 11 mm |
External drive (s) | WS22 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Corner component KS90 hot dip galvanised, Meka
Cable routing conduit Thorsman, TEK
Circuit breaker
Square nut, low profile
Lighting rail T33, Unipro
Cover plate 87 mm with adapter Exxact
Circuit board support TRPS
Staples for hammer stapler
Terminal block 2004 series GNYE 2 conductor TOPJOB® S
Crimp sleeve WEBSOS