Hexagon nut
DIN 934, steel I8I, yellow passivated (A2C)
DIN 934/8 ZP M1,6
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M16 x 2 |
Thread type x nominal diameter (D) | M16 |
Height (m) | 13 mm |
External drive (s) | WS24 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Last viewed
Hexagon socket screw, cylinder head
Enclosed industrial luminaire Damp Proof Value, IP65
Hexagon socket screw, flat round head, flange
EMC LOCKNUT MS PG EMC, brass nickel plated
Combination thermostat ETH-BLANK-WIFI
Auxiliary contactor block CTXMINI
Lighting connector 224 series WAGO
Plastofast, pan head
Nylock nut, high profile, clamping piece (non-metal insert, ring)
Drive screw