Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934/8 ZP M20
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M20 x 2.5 |
Thread type x nominal diameter (D) | M20 |
Height (m) | 16 mm |
External drive (s) | WS30 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Circuit breaker
Joint connector KSF-NL hot dip galvanised, Meka
LED power source 12V IP20 standard FTLight
Flange bolt, hexagon head, lock toothing
Feather key, high profile
Auxiliary contactor, right MS
Lighting rail T-component TA3A, Unipro
Coupling relay Jussi
Surface-mounted switch IP21 Impressivo
Slotted screw cylinder head ISO 14579