Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
DIN 934/8 ZP M6
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
 | |
Thread type x nominal diameter x pitch (D) | M6 x 1 |
Thread type x nominal diameter (D) | M6 |
Height (m) | 5 mm |
External drive (s) | WS10 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Notice | DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread). |
Datasheets(X)
Last viewed
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Surface mounting frame downlight Downlight Slim DN
Circuit board support TRTCBS
Flange bolt, hexagon head, lock toothing
Equipotential outlet 2-part Exxact
EMC LOCKNUT MS PG EMC, brass nickel plated
Terminal block 2210 series with push-button 3 conductor TOPJOB® S
Signal cable LIYY
Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
Plastofast, pan head