Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, steel I6I, zinc plated
DIN 985/6 ZP M2
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M2 |
Height (h) | 2.8 mm |
External drive (s) | WS4 |
Standards | DIN 985 |
Material | Steel |
Property class | I6I |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Through standoff WESO
Valena Life with Netatmo home/away wireless switch
Lighting rail T-component TA3A, Unipro
Loudspeaker centre plate Jussi
Signal cable FLEX-JZ-CY
End plate 2016 series
Mounting plate Cubo O/C
Circuit breaker
Alkaline battery Energizer Industrial
Dimmer switch for power rooms LUNA