Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, steel I6I, zinc plated
DIN 985/6 ZP M2,5
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M2.5 |
Height (h) | 3.7 mm |
External drive (s) | WS5 |
Standards | DIN 985 |
Material | Steel |
Property class | I6I |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
WÜPOFAST®, blue passivated Chipboard screw
LED lamp PIN G9 LED PARATHOM
Downlight Slim SQ, IP20
Coupling sleeve straight OBO
Flush-mounted outlet IP20 Jussi
Spacer screw SIUL ZN
Surface mount luminaire Surface Circular IP44 250 Sensor
Compressed ring cable shoe Elpress
Perimeter trunking adhesive fastening WDK
Cable gland