Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, stainless steel A2-70
DIN 985 A2/70 M5
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M5 x 0.800 |
Thread type x nominal diameter (D) | M5 |
Height (h) | 5 mm |
External drive (s) | WS8 |
Standards | DIN 985 |
Material | Stainless steel A2 |
Property class | 70 |
Surface | Plain |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Pipe end cap plastic
Surface-mounted type F outlet hinged IP44 Artic
Floodlight Floodlight PFM, IP65
Terminal block 2016 series 2 conductor TOPJOB® S
Hexagon socket screw, cylinder head
Cover plate 87 mm with adapter Exxact
Circuit board support TRMDLSP1
LED strip profile cap LS
Lighting rail T-component TA3A, Unipro
Hexagon socket screw, cylinder head