Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, stainless steel A2
DIN 985 A2 M2
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M2 |
Thread type x nominal diameter x pitch (D) | M2 x 0.4 |
Height (h) | 2.5 mm |
Standards | DIN 985 |
Material | Stainless steel A2 |
Surface | Plain |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Hexagon socket screw, flat cylinder head
Plafond light Surface Bulk Head, IP65
Connector WMT UC stainless steel A4, Meka
Hexagon socket screw, cylinder head
Perimeter trunking screw fastening WDK
Lock washer, type B
Rigid installation cable halogen free, MMJ Afux
Cable clamp KP
Enclosure elevator Cubo O/C
Square washer