Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, stainless steel A2
DIN 985 A2 M3
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M3 |
Height (h) | 4 mm |
External drive (s) | WS5.5 |
Standards | DIN 985 |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Office luminaire Linear IndiviLED Direct
Floodlight Floodlight PFM, IP65
Cover plate 85 mm Exxact Basic
RUBBER SEAL Enclosed
Hexagon socket screw, flat cylinder head
Adapter 1-pt/2-pt Impressivo
Quick-action clamp cover
LED tube OSRAM SubstiTUBE T8 ADVANCED UO CONNECTED G2 1500mm
EMC LOCKNUT MS PG EMC, brass nickel plated
Wing repair washer, large outer diameter