Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, uncoated acid-resisting steel A4
DIN 985 A4 M2,5
With registration you can access the Würth Elektro online shop selection.
DIN 985 replaced with ISO 10511. There is some similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | Fine thread removed | Nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | Hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M2.5 |
Standards | DIN 985 |
Material | Stainless steel A4 |
Surface | Plain |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Surface-mounted utility outlet IP44, phase inverter
Motion detector LUXA IP55 180
Defrosting cable Ebeco Frostvakt 10
Enclosure elevator Cubo O/C
Terminal block 2001 series 3 conductor GNYE TOPJOB® S
Vehicle protecting tube PAER
Mounting plate KL zinc plated, Meka
Installation conductor H05V2-K MKJ 90
Slotted cable trunking with cut-off groove Trancab
Slotted cable trunking with cut-off groove Trancab