Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M5X10 ZP.SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length (l) | 10 mm |
Head diameter (d) | 11.8 mm |
Head height | 5.4 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS8 |
Thread type | Metric thread |
Pitch | 0.8 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Deep beam lamp HQL LED HIGHBAY
Pipe clip VBS 2955 OBO
Hexagon socket screw, flat round head
Shim
Floor heater cable Multiflex 20
Charging station EVlink Pro AC 22kW T2 cable Asi 30 mA
Office luminaire Linear IndiviLED Direct/Indirect
Flush-mounted switch 10AX – 250V IP20 Valena Life
Slotted screw pan head DIN 7985
Floodlight Floodlight PFM Asymetric, IP66