Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M5X12 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M5 |
Length (l) | 12 mm |
Head diameter (d) | 11.8 mm |
Head height | 5.4 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS8 |
Thread type | Metric thread |
Pitch | 0.8 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Snow melting mat Ebeco Snowmat
Circuit breaker Acti 9 iC60N
Lighting rail cover CS3, Unipro
Air purifier UVC HEPA AIR PURIFIER USB
Plastic rivet black TRRH
Cable tie TWIST LOCK natural TRTL
Rubber cable NSGAFÖU 1.8/3 kV
Adapter For Forix accessory
Hexagon socket screw, cylinder head
Slotted screw pan head DIN 7985