Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M6X10 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length (l) | 10 mm |
Head diameter (d) | 14.2 mm |
Head height | 6.6 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS10 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Cable routing conduit aluminium, Instal
Flush-mounted switch 10AX – 250V IP20 Valena Life
Wall mounting set Cubo O/C
3-phase conductor rail system MS
General luminaire Ledinaire Wall-mount
Fire retardant junction box Multifix KR00
Optical smoke alarm SA411S
Installation cable MMJ
Junction box 221 series WAGO
Apparatus box with strain relief and plaster cover Multifix