Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M6X12 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length (l) | 12 mm |
Head diameter (d) | 14.2 mm |
Head height | 6.6 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS10 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Wall luminaire
Flush-mounted switch 10AX – 250V IP20 Valena Life
Optical smoke alarm SA411S
Lighting rail T33, Unipro
Apparatus box with strain relief and plaster cover Multifix
Junction box 221 series WAGO
Reflection shields Surface Bulkhead Ring
Installation conduit JM Wavin
Apparatus box Multifix KR00
Final circuit board enclosure flush/surface Ensto