Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M6X20 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M6 |
Length (l) | 20 mm |
Head diameter (d) | 14.2 mm |
Head height | 6.6 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS10 |
Thread type | Metric thread |
Pitch | 1 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Terminal block ZS16 SNK series
Nipple for board wall boxes ABB
Lock washer, type B
Carrier terminal block 2002 series 4 conductor TOPJOB® S
Plastic rivet black TRRH
Lighting rail TC34, Unipro
Weld stud ISO 13918 PT
Energy transfer chain cable EMC HF PUR-C
Hexagon socket screw, cylinder head
Vehicle protecting tube PAER