Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M8X16 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length (l) | 16 mm |
Head diameter (d) | 17.9 mm |
Head height | 8.1 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS13 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Hexagon socket screw, cylinder head
Impulse spring Impressivo and Jussi
End component for DLP-S cable channel
Lighting rail cover plate CP3, Unipro
Flange bolt, hexagon head
Motor protection switch TeSys GV2
Wall luminaire IP44, Dana FTLight
Crimp sleeve WEBSOS
Ceiling bracket CB3, Unipro
Signal cable MMO