Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M8X20 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter | M8 |
Length (l) | 20 mm |
Head diameter (d) | 17.9 mm |
Head height | 8.1 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive | WS13 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Enclosed industrial luminaire Damp Proof Classic, IP65
Circuit breaker
Washer, flat, no chamfer
Spacer screw SIUL ZN
Plastofast, countersunk head
Digital time switch multi-purpose daily/weekly programme Legrand
Double apparatus box Multifix KR24
Circuit board support TRBHL1
Installation conductor H07V2-K Twin cable
Circuit breaker