Flange bolt, hexagon head, lock toothing
W-0274, steel 8.8, zinc plated, blue passivated (A2K)
DIN6921/8.8 M8X25 ZP+SERRATION
With registration you can access the Würth Elektro online shop selection.
- The locking teeth push into the material of the component that is being screwed and stop it from opening (no unlocking torque in the unscrewing direction)
- The material that is being screwed must demonstrate a significantly lower hardness in comparison to the screw (surface hardness of the screw: min. 250 HV)
- Particularly suited for short clamping lengths
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M8 |
Length (l) | 25 mm |
Head diameter (d) | 17.9 mm |
Head height (k) | 8.1 mm |
Standards | WN 274 |
Material | Steel |
Property class | 8.8 |
Surface | Zinc plated |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Head type | Hexagon head with flange |
Drive type | Outer hexagon |
External drive (s) | WS13 |
Thread type | Metric thread |
Pitch | 1.25 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
RoHS-compliant | Yes |
Last viewed
Mounting profile set LUMINES
Hexagon socket screw, flat round head, flange
Wall luminaire IP44, Dana FTLight
Fender washer, wing repair washer
Centre plate for key-operated switch Exxact
Cable tie lockable natural TRLWS 2A
Slotted screw pan head DIN 7985
Cable trunking, adhesive tape mounting Ultra Renova
Blind rivet domed head open
Wire shelf WMT HDG Hot dip galvanised, Meka