Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, steel I8I, zinc plated
DIN985/8 ZP M10 WITH BLUE RING
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M10 x 1.5 |
Thread type x nominal diameter (D) | M10 |
Height (h) | 10 mm |
External drive (s) | WS17 |
Standards | DIN 985 |
Material | Steel |
Property class | I8I |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Contactor AF52
Fender washer, wing repair washer
Disconnect/test terminal block 2007 series TOPJOB® S
Circuit breaker
Charging station load management control unit EVlink Home Peak Controller 3-phase
Indicator light Compact
Surface-mounted frame 40/100 Impressivo
Flush-mounted switch IP21 Exxact
High-bay luminaire IP65 High Bay Gen 4
Slotted screw cylinder head DIN 84