Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, steel I8I, zinc plated
DIN985/8 ZP M14 WITH BLUE RING
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M14 |
Thread type x nominal diameter x pitch (D) | M14 x 2 |
Height (h) | 14 mm |
External drive (s) | WS22 |
Standards | DIN 985 |
Material | Steel |
Property class | I8I |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Circuit breaker
Serrated lock washer/disk, externally serrated, type A
Reflection shields Surface Bulkhead Ring
Optical smoke alarm SA701
Electrical cable (MMJ/PFXP) Tele-Fonika MMJ/PFXP
Downlight IP65 Ledinaire All-in CCT DIM
Micro socket terminal 2273 series, WAGO
Apparatus box Multifix KR00
Fire retardant junction box Multifix KR00
Installation conduit JM Wavin