Nylock nut, low profile, clamping piece (non-metal insert, ring)
DIN 985, steel I8I, zinc plated
DIN985/8 ZP M20 WITH BLUE RING
With registration you can access the Würth Elektro online shop selection.
- DIN 985 compliant, low-profile nylock nuts do not support ISO 898-2 compliant test loads
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 985 replaced with ISO 10511. There is some limited similarity (threads M7, M18, M22, M27, and M33, and nominal diameter M36 > threads removed | fine thread removed | nut height changed | M10, M12, and M14 width across flats changed to 16, 18, and 21 millimetres | hardness classes changed to 04 and 05).
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M20 |
Thread type x nominal diameter x pitch (D) | M20 x 2.5 |
Height (h) | 20 mm |
External drive (s) | WS30 |
Standards | DIN 985 |
Material | Steel |
Property class | I8I |
Surface | Zinc plated |
RoHS-compliant | Yes |
Form | Low |
Locking device operating principle | Clamping part polyamide ring |
Locking function | Locking against loosening by clamping |
Last viewed
Locknut, brass
Sheet metal terminal DIN 46234 Abiko Elpress
Lever bright lens, marking light, Impressivo
Hexagon screw, full thread
Pendant control case Harmony – XAC-A 2013
Air purifier UVC HEPA AIR PURIFIER USB
Circuit board support TRBHL1
Tool T1L, Unipro
Plastic cabinet Cubo S
Sound-proofing component Instal