
Switchgear panel surface IP30, with door
DISTRIB. BO. 35A IP30 POINTER3412-500M
UTU
With registration you can access the Würth Elektro online shop selection.
The switchgear enclosure is made of hot-dip galvanized steel sheet and it is equipped with a door. No feed-through flanges, knock-outs are punched on the sides for cabling. 120x210mm knock-out in the back plate.
Can be inserted horizontally or vertically and can be connected together with a separately ordered switchear panel enclosure.
Datasheets(X)
Mounting method | Surface mounted |
Number of phases | 3 |
Protection | Miniature-/earth leakage circuit breaker |
Total number of groups | 12 |
Number of direct groups | 3 |
Number of light groups | 0 |
Number of groups behind earth leakage switch | 9 |
Number of earth leakage circuit breakers | 0 |
Number of earth leakage switches 30 mA | 2 |
Number of earth leakage switches 300 mA | 0 |
Number of arc fault detection devices AFDD | 0 |
Protection main switch | Yes |
Number of poles main switch | 3 |
Main switch rated current | 40 A |
Protection incoming RCD | No |
Protection high integrity | Yes |
Protection split load | No |
Protection dual RCD | No |
Number of outgoing ways | 0 |
Suitable for data | No |
Cooker group | 3-phase |
Cooker group suitable as power current group | Yes |
With socket outlet | No |
With bell transformer | No |
Over voltage protection | No |
With meter | No |
Housing material | Steel |
Degree of protection (IP) | IP30 |
Height | 500 mm |
Width | 280 mm |
Depth | 93 mm |
Built-in depth | 0-0 mm |
Extension possible | Yes |
With transparent cover | No |
Lockable | No |
E-number Finland | 3332372 |
Brand | UTU |