Branch connector Ensto
DISTRIBUTION BLOCK 3-POL NAD3.W
ENSTO
With registration you can access the Würth Elektro online shop selection.
The branch connector has one input for a female connector and three outputs for male connectors. Acceptable connectors are defined in the branch connector’s switching characteristics. If required for installation site, the branch connector can be fastened to the substrate with two screws, max. Ø 3.5 mm, mounting hole clearance 38 mm.
Datasheets(X)
Rated voltage | 250 V |
Rated current | 20 A |
Number of poles | 3 |
Degree of protection (IP) | IP20 |
Number of inputs | 1 |
Number of outputs | 3 |
Pole codification | L, N, PE |
Mechanical coding | Yes |
Colour coding/contact insert | White |
Type of locking | Integrated in plug-in connector |
Halogen free | Yes |
Max. continuous temperature resistance contact part | 70 °C |
Max. continuous temperature resistance strain relief | 70 °C |
Housing material | Polyamide (PA) |
Contact material | CuZn |
Surface treatment contacts | Silver-plated |
Pollution degree | 2 |
Rated surge voltage | 4 kV |
Length | 46 mm |
Height | 44 mm |
Width | 46 mm |
Type of distributor | Distribution terminal block |
Type of integrated switching | None |
Mounting possibility | With separate adapter |
E-number Finland | 1934550 |
Brand | ENSTO |
