Switchgear panel flush/surface IP30 Bulldog
DISTRIBUTION BOARD 50A IP30 BULLDOG3836J
UTU
With registration you can access the Würth Elektro online shop selection.
Surface and flush-mounted switchgear panel for detached houses and other small premises in dry spaces. The circuit boards have been designed to meet increasing IT needs. The circuit board can be equipped with a fixed data section or with retrofittable data enclosures. The data enclosures can easily be used to make the necessary extensions or to update IT needs, e.g. for retrofitting in a renovation project.
Datasheets(X)
Mounting method | Surface mounted/recessed mounted |
Number of phases | 3 |
Protection | Miniature-/earth leakage circuit breaker |
Total number of groups | 36 |
Number of direct groups | 12 |
Number of light groups | 0 |
Number of groups behind earth leakage switch | 24 |
Number of earth leakage circuit breakers | 0 |
Number of earth leakage switches 30 mA | 4 |
Number of earth leakage switches 300 mA | 0 |
Number of arc fault detection devices AFDD | 0 |
Protection main switch | Yes |
Number of poles main switch | 3 |
Main switch rated current | 80 A |
Protection incoming RCD | No |
Protection high integrity | Yes |
Protection split load | No |
Protection dual RCD | No |
Number of outgoing ways | 9 |
Suitable for data | No |
Cooker group | 3-phase |
Cooker group suitable as power current group | Yes |
With socket outlet | No |
With bell transformer | No |
Over voltage protection | No |
With meter | No |
Housing material | Steel |
Degree of protection (IP) | IP30 |
Height | 600 mm |
Width | 500 mm |
Depth | 100 mm |
Built-in depth | 100-100 mm |
Extension possible | Yes |
With transparent cover | No |