Distribution terminal block TOPJOB S
DISTRIBUTION CONNECTOR BK 2006-8035 WAGO
WAGO
With registration you can access the Würth Elektro online shop selection.
With WAGO TOP JOB’S distribution terminal blocks, you collect the zeros of fault currents in one connector, install phase distribution, grounding or low-voltage side +/- separation.
There are max 1 cable slots on the supply side. 10 mm2 for a cross-sectional area and on the output side 6 pcs max. 2.5 mm2 for a cross-sectional area.
The connectors are quick to install thanks to push-in spring technology and have a fixed end plate.
By using these connectors, you save rail space in the lateral direction, because the width of the connector is only 9 mm, i.e. ½ module. Marking can be done traditionally with WMB markings or printed with Smartprinters.
Datasheets(X)
Connectable conductor cross section fine-strand without cable end sleeve | 0.5-10 mm² |
Connectable conductor cross section solid-core | 0.5-10 mm² |
Connectable conductor cross section multi-wired | 0.5-10 mm² |
Rated current In | 41 A |
Rated voltage | 800 V |
Type of electrical connection 1 | Spring clamp connection |
Type of electrical connection 2 | Spring clamp connection |
Number of levels | 1 |
Number of clamp positions per level | 7 |
Mounting method | DIN rail (top hat rail) 35 mm |
Inflammability class of insulation material according to with UL94 | V0 |
Width | 9 mm |
Height | 73.8 mm |
Colour | Black |
E-number Finland | 1939350 |
Brand | WAGO |
Last viewed
Indicator lamp CX3 Single indicator
Cable routing conduit inner corner LKM
Floodlight Floodlight PFM, IP65
Motor protection switch TeSys GV2
Wing repair washer, large outer diameter
Auxiliary contactor, right MS
Wall bracket VK hot dip galvanised, Meka
Adjustable corner component ALC3, Unipro
Circuit breaker
Protector plug PMR