Downlight Hide-a-lite 12 pack, IP44
DOWNLIGHT 1202 12V STEEL 4000K
HIDE-A-LITE
With registration you can access the Würth Elektro online shop selection.
This luminaire makes it easier than ever to replace old halogen fittings with energy-efficient LED technology. Push-in terminals integrated with the heat sink enable you to use existing wiring and connect the fitting to your old transformer and dimmer. The luminaire can be installed in existing recesses (57-60 mm) and has an IP44 rating for use in different environments. Connects to 12V AC/DC (only dimmable with AC).
Datasheets(X)
Suitable for surface mounting | No |
Suitable for built-in mounting | Yes |
Suitable for suspended mounting | No |
Suitable for traverse mounting | No |
Suitable for pedestal/floor mounting | No |
Suitable for light-track mounting | No |
Suitable for clamp-mounting | No |
Suitable for low voltage cable system | No |
Adjustability | Not adjustable |
With movement sensor | No |
With light sensor | No |
Lamp type | LED not exchangeable |
With light source | Yes |
Suitable for number of light sources | 1 |
Lamp holder | None |
Housing material | Aluminium |
Surface protection | Lacquered |
Housing colour | Stainless steel |
Material cover | None |
Surface brushed | Yes |
Voltage type | AC/DC |
Nominal voltage | 12-12 V |
Type of control gear | Electronic transformer |
With control gear | No |
Dimming depending on control gear | Yes |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Dimming DALI | No |
Dimming DMX | No |
Dimming DSI | No |
Dimming potentiometer (integrated) | No |
Dimming GPRS | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | No |
Dimming phase cut-on | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Dimming with push-button | No |
No dim function | No |
Reflector | Matt |
Light distributor | None |
Light sharing | Symmetric |
Beam angle | Wide beam 41-80° |
Light outlet | Direct |
Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
Rated life time L70/B50 at 25 °C | 75000 h |
Degree of protection (IP) | IP44 |
Impact strength | Other |
Protection class | III |
Rated ambient temperature according to IEC 62722-2-1 | -20-40 °C |
Max. system power | 4.7 W |
Colour of light | White |
Colour temperature | 4000-4000 K |
Colour rendering index CRI | 80-89 |
Luminous flux | 365-365 lm |
Rated luminous flux according to IEC 62722-2-1 | 365 lm |
Luminous intensity | 290 cd |
Height/depth | 19 mm |
Outer diameter | 70 mm |
Built-in height/depth | 17 mm |
Type of wiring | Ending |
Connection type | Push-in clamp |
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
Filament test according to IEC 60695-2-11 | None |
Photobiological safety according to EN 62471 | Other |
Suitable for workplace according to EN 12464-1 | No |
Covering of the luminaire with thermally insulating material possible | No |
Colour consistency (McAdam ellipse) | SDCM3 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!