EMC CABLE GLAND MS PG WITH EARTH CLAMPS EMC, brass nickel plated
EMC cable gland with earth clamps, DIN 40430 compliant PG thread, brass nickel plated
EMC-CABLE GLAND BRS NI PG 13
With registration you can access the Würth Elektro online shop selection.
Properties
- Integrated anchor point
- Wide seal and contact area
- Suited for insulating tubes
- Protects against twisting
Outer disc Polyamide PA6 V-2
Sealing ring Polychloroprene-Nitrile rubber CR/NBR
Collet materialBrass CuZn39Pb3, nickel plated
O-ring Nitrile rubber NBR
Thread Pg, DIN 40430
Temperature range -20°C / +100°C
Protection class IP68 - 5 bar
UL/CSA FileE140310
Datasheets(X)
 | |
Connection thread (conduit thread) | PG 13 |
Min./max. cable diameter | 6-12 mm |
Width across flats | 22 mm |
Min./max. temperature conditions | -20 to 100 °C |
IP protection class | IP 68 |
Max. pressure | 5 bar |
Material | Brass |
Surface | Nickel plated |
Material of lamellar insert | PA 6 V-2 - Polyamide 6 V-2 |
Material of sealing ring | Polychloroprene nitrile rubber CR/NBR |
Min. cable diameter | 6 mm |
Max. cable diameter | 12 mm |
Material of sealing ring for the connection thread | Nitrile natural rubber NBR |
Min. temperature conditions | -20 °C |
Max. temperature conditions | 100 °C |
DIN | 40430 |
Last viewed
Terminal block 2001 series 3 conductor GNYE TOPJOB® S
Surface-mounted type F outlet hinged IP44 Artic
Damp proof industrial luminaire IP65 Damp Proof Classic sensor
Timer Intro
Surface-mounted luminaire IP65 Surface Bulk Head with motion detector
Lighting rail connector CJU3, Unipro
Motor protection switch MPX3 32H
Cable clamp CCB zinc plated, Meka
Taptite DIN 7500-M, countersunk head, thread rolling
Circuit breaker