Energy meter GNM3D-LP RS485 GARO
ENERGY METER GNM3D-LP RS485 MODB 3V
With registration you can access the Würth Elektro online shop selection.
Energy meter GNM3D-RS485 – DIN rail mounted direct connection meter, designed for DLM load management systems. For example, used with GLBDC and GTBDC charging stations in sites that are solar powered.
Datasheets(X)
Type of meter | Electronic |
Nominal current (In) | 65 A |
Max. current (Imax) | 65 A |
Nominal voltage (Un) N-L | 208-400 V |
Nominal voltage (Un) L-L | 208-400 V |
Frequency | 50-60 Hz |
Accuracy class | B |
Pole type | Three conductor |
Model | Direct measurement |
Energy type | Effective power |
Suitable for | Purchase/supply |
Tariff type | One-tariff |
Tariff control | Internal |
Measurement type load profile | No |
Escapement mechanism | No |
Calibrated | Yes |
Approval | Measuring Instruments Directive |
Pulse output | Optical |
Pulse type | S0 |
Pulse rate | 100-1000 Imp/kWh (kvarh) |
Type of indication | Digital |
Mounting method | DRA (DIN-rail adapter) |
Width in number of modular spacings | 3 |
Width | 54 mm |
Depth | 63 mm |
Height | 91 mm |
Type of interface | Modbus |
EEC40 signature | No |
With lock code | No |
Number of positions total (counter) | 9999999.999 |
Degree of protection (IP) | IP20 |
Degree of protection (NEMA) | Other |
E-number Finland | 6711413 |
Last viewed
Suspension bracket PB, Unipro
Downlight IP22 Spot Adjust
Plug connector male with cable clamp Ensto
Circuit breaker
Flush-mounted switch 10AX – 250V IP20 Valena Life
Hexagon screw, full thread, fine thread
Terminal block selection L-Boxx
Cable tie micro natural TRMWSEA2
Analogue time switch Legrand
Contactor AF09