Energy meter GNM3T-LP RS485 GARO
ENERGY METER GNM3T-LP RS485 MODB 3V
With registration you can access the Würth Elektro online shop selection.
The GNM3T-LP RS485 energy meter, DIN rail mounting, is designed for DLM load management systems of GLBDC and GTBDC charging stations, especially in connection with solar power. Using the meter requires separate current transformers.
Datasheets(X)
Type of meter | Electronic |
Nominal current (In) | 0 A |
Max. current (Imax) | 0 A |
Nominal voltage (Un) N-L | 400-480 V |
Nominal voltage (Un) L-L | 400-480 V |
Frequency | 50-60 Hz |
Accuracy class | B |
Pole type | Three conductor |
Model | Measurement transformer |
Energy type | Blind power |
Suitable for | Purchase/supply |
Tariff type | One-tariff |
Tariff control | Internal |
Measurement type load profile | No |
Escapement mechanism | No |
Calibrated | Yes |
Approval | Measuring Instruments Directive |
Pulse output | None |
Pulse type | S0 |
Pulse rate | 100-1000 Imp/kWh (kvarh) |
Type of indication | Digital |
Mounting method | DRA (DIN-rail adapter) |
Width in number of modular spacings | 3 |
Width | 54 mm |
Depth | 63 mm |
Height | 91 mm |
Type of interface | Modbus |
EEC40 signature | No |
With lock code | No |
Number of positions total (counter) | 9999999.999 |
Degree of protection (IP) | IP20 |
Degree of protection (NEMA) | Other |
E-number Finland | 6711410 |
Last viewed
Circuit breaker
Thread-forming bushing WECLS
Circuit breaker
3-phase conductor rail system MS
Lighting rail X-component XA3, Unipro
Wing repair washer, large outer diameter
Straight adapter MPCB MPX3
Hexagon socket screw, cylinder head
Defrosting cable Ebeco Frostvakt 10
Auxiliary contactor MPCB MPX3 front installation