Motion detector, flush IP21 160 Exxact
EXXACT MOTION DETECTOR WITH RE
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
Exxact electronic devices are an easy solution to improving electrification. For example, you can install a motion detector to have lights switch on and off automatically.
- Exxact motion detector with button 10 A.
- Neutral wire required.
- No minimum load requirement.
- Detection angle160° – max. distance 8 m.
- Recommended installation height 1 m.
- Integrated 10 A switch.
- Integrated adjustable (5-500 Lux) dimmer switch.
- Integrated timer. 1 s – 30 min. Default 5 min.
- Four modes:
1. Automatic mode (default; lights switched on when motion is detected and the light level criterion is met)
2. Manual mode; integrated switch/external switch
3. Slave mode
4. Test mode
- Integrated short circuit and overload protection with automatic reset. Soft start.
- Screw terminals
- Surface mounting, 35 mm surface-mounted apparatus box.
- IP21
Datasheets(X)
Model | Movement sensor |
Sensor type | Passive infrared |
With DALI interface | No |
Constant light control | No |
HVAC-control | No |
Forced switch on | Yes |
Forced switch off | Yes |
Animal zone | No |
Creep-under protection | No |
Networkable | No |
Scan angle | 160 ° |
Optimum mounting height | 1 m |
Staircase light controller | Yes |
Bridging switch | No |
Max. reach sideways | 6 m |
Max. presence range | 86 m² |
Max. reach frontally | 8 m |
Suitable for wireless transmission | No |
Remote operation | No |
With remote control | No |
Response value sensitivity adjustable | No |
Response value luminosity adjustable | Yes |
With signal unit | No |
Teach-function for response value luminosity | No |
Suitable for ceiling mounting | No |
Suitable for wall mounting | Yes |
Dim function with dimmer basic element | No |
Connection type | Screwed terminal |
Material | Plastic |
Material quality | Thermoplastic |
Halogen free | No |
Surface protection | Other |
Surface finishing | Matt |
Anti-bacterial treatment | No |
Colour | Anthracite |
Transparent | No |
Degree of protection (IP) | IP21 |
Voltage type | AC |
Frequency | 50-50 Hz |
Nominal voltage | 230 V |
Min. switch-on time | 1 s |
Max. duty cycle | 30 min |
Switch-off delay | 1800 s |
Switching-on delay | 0 s |
Detection angle horizontal | 160-160 ° |
Pivoting range sensor, horizontal | 0-0 ° |
Pivoting range sensor, vertical | 0-0 ° |
Response value luminosity | 5-500 lx |
Max. switching power | 2200 W |
Suitable for C-load | Yes |
Temperature | 5-40 °C |
Number of switching zones | 13 |
Max. starting current | 10 A |
Substation input | Yes |
With alarm function | No |
Width | 71 mm |
Height | 71 mm |
Depth | 49 mm |
Built-in width | 55 mm |
Built-in depth | 27 mm |
Built-in length | 55 mm |
Built-in diameter | 55 mm |
Min. depth of built-in installation box | 46 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!