Residual current breaker with overcurrent ADA 30mA
FAULT CIRCUIT BREAKER 1L+N C 2X16A
UTU
With registration you can access the Würth Elektro online shop selection.
Residual current breaker with voltage non-dependant electromechanical fault current function. Trip sensitivity 30mA.
Datasheets(X)
Number of poles (total) | 2 |
Number of protected poles | 1 |
Rated voltage | 240 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated current | 16 A |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 3 |
Rated short-circuit breaking capacity according to IEC 60947-2 | 10 kA |
Disconnection characteristic | Undelayed |
Surge current capacity | 0.25 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | Yes |
With interlocking device | No |
Over voltage category | 3 |
Pollution degree | 2 |
Width in number of modular spacings | 2 |
Built-in depth | 68 mm |
Degree of protection (IP) | IP20 |
E-number Finland | 3260702 |
Brand | UTU |