Residual current breaker with overcurrent ADM446C 30mA
FAULT CIRCUIT BREAKER 4-POLE C 4X16A
UTU
With registration you can access the Würth Elektro online shop selection.
Residual current circuit breaker according to EN61009-1 and EN61009-2-1 with a 4-pole circuit breaker for 400V AC circuits and residual current protection in a compact housing. Contact protection according to IP2x DIN VDE 0106 part 100. Twin connectors for busbar and wire connection on the underside, blue test button on the front and fault current failure indication.
Datasheets(X)
Number of poles (total) | 4 |
Number of protected poles | 4 |
Rated voltage | 400 V |
Rated insulation voltage Ui | 500 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated current | 16 A |
Rated fault current | 0.03 A |
Leakage current type | A |
Current limiting class | 3 |
Disconnection characteristic | Undelayed |
Surge current capacity | 0.25 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching neutral conductor | No |
With interlocking device | No |
Over voltage category | 3 |
Pollution degree | 2 |
Width in number of modular spacings | 4 |
Built-in depth | 70 mm |
Degree of protection (IP) | IP2X |
Last viewed
LED strip 24V IP65 Prime Strip Prime Strip
Plastofast, pan head
Box cover AK11
Combination thermostat ETH-COLOR-WIFI
Spacer ring Multifix KKR1.5
Cover plate 87 mm with adapter Exxact
Installation conductor H07V2-K MKEM 90
Handle Compact KSH48.01
Installation conductor H07V2-K MKEM 90
Residual current circuit breaker with overcurrent DS201 30mA