Fibre gasket, sealing ring, vulcanised rubber, type A
Type A
FIBRE SEAL 12X18
With registration you can access the Würth Elektro online shop selection.
Fibre gasket, this sealing ring made of vulcanised fibre is resistant to mineral oils, grease and weak acids, ketones, esters, and chlorocarbon; it also has low conductivity (insulation). It is best suited for all kinds of water conduits and pipelines.
Datasheets(X)
![]() | |
Material | Vulcanised fibre |
Surface | Plain |
Form | A |
Nominal size | 12 x 18 mm |
Internal diameter (d) | 12.2 mm |
Outer diameter (d) | 17.9 mm |
Thickness (h) | 1.5 mm |
Suitable for vehicle manufacturer | Audi, Volkswagen |
Corresponds to original spare part number | VW/Audi: N.013 851.1 |
Max. temperature resistance | 120 °C |
DIN | 7603 |
Suitable for male thread | 12 x 1.5 mm |
Notice | When choosing sealing rings, note that the dimensions are defined as the internal and external diameter. Should the correct sealing ring size be unavailable, the sealing ring must be chosen based on internal diameter. E.g. a 10x12 sealing ring is replaceable with a 10x14 or even 10x16 sealing ring. |