Floodlight IP65 Floodlight PFM Sensor
FL PFM 10W/3000K SYM S WT
LEDVANCE
With registration you can access the Würth Elektro online shop selection.
The third-generation LEDVANCE FLOODLIGHT floodlights’ enhanced luminosity is up to 125 lm/W and their useful life is 70,000 hours (L70). The warranty period of low-power floodlights (10–50W) is five (5) years. The sensor floodlights’ sensors have been replaced by smaller sensors. Thanks to this update, the floodlights can be constantly switched on (Always On mode) by switching the power on-off-on-off-on within four seconds. You can deactivate the Always On mode by switching the luminaire off for five seconds. 10–50W sensor floodlights are now available black and white and with a colour temperature of 3000 K or 4000 K.
Datasheets(X)
Suitable for surface mounting | Yes |
Suitable for built-in mounting | No |
Suitable for suspended mounting | No |
Suitable for ceiling mounting | No |
Adjustability | Swivelling |
With movement sensor | Yes |
With light sensor | Yes |
Lamp type | LED not exchangeable |
With light source | Yes |
Housing material | Aluminium |
Surface protection | Powder coating |
Housing colour | White |
Material cover | Glass opal |
Voltage type | AC |
Nominal voltage | 100-277 V |
LED nominal current at constant current | 48-48 mA |
Type of control gear | Electronic ballast |
With control gear | Yes |
Dimming DALI | No |
No dim function | Yes |
Light distributor | Reflector |
Beam angle | Open beam/diffuse |
Light outlet | Direct |
Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
Total harmonic distortion | 19 |
Rated life time L70/B50 at 25 °C | 70000 h |
Rated life time L80/B10 at 25 °C | 55000 h |
Degree of protection (IP) | IP65 |
Impact strength | IK07 |
Protection class | I |
Rated ambient temperature according to IEC 62722-2-1 | -30-50 °C |
Max. system power | 10 W |
Colour of light | White |
Colour temperature | 3000-3000 K |
Colour rendering index CRI | 80-89 |
Luminous flux | 1100-1100 lm |
Rated luminous flux according to IEC 62722-2-1 | 1100 lm |
Power factor | 0.9 |
Width | 131 mm |
Height/depth | 53 mm |
Length | 159 mm |
Type of wiring | Ending |
Number of poles | 3 |
Connection type | Other |
Filament test according to IEC 60695-2-11 | 650 °C - 30 s |
Luminaire efficacy | 110 lm/W |
Photobiological safety according to EN 62471 | RG1 |
Suitable for workplace according to EN 12464-1 | No |
Covering of the luminaire with thermally insulating material possible | No |
Colour consistency (McAdam ellipse) | SDCM5 |