Floodlight Floodlight PFM, IP65
FL PFM 80W/6500K SYM 10 000lm
LEDVANCE
With registration you can access the Würth Elektro online shop selection.
LEDVANCE FLOODLIGHT PERFORMANCE floodlights have an enhanced luminosity of up to 125 lm/W and the useful life and warranty period of low-power floodlights have been increased. LEDVANCE FLOODLIGHT PERFORMANCE floodlights have an operating temperature range of –30°C...+50°C and they are IP65 and IK07 rated and ENEC-certified.
Datasheets(X)
Suitable for surface mounting | Yes |
Suitable for built-in mounting | No |
Suitable for suspended mounting | No |
Suitable for ceiling mounting | No |
Adjustability | Swivelling |
With movement sensor | No |
With light sensor | No |
Lamp type | LED not exchangeable |
With light source | Yes |
Housing material | Aluminium |
Surface protection | Powder coating |
Housing colour | Black |
Material cover | Glass opal |
Voltage type | AC |
Nominal voltage | 100-277 V |
LED nominal current at constant current | 430-430 mA |
Type of control gear | Electronic ballast |
With control gear | Yes |
Dimming DALI | No |
No dim function | Yes |
Light distributor | Reflector |
Beam angle | Open beam/diffuse |
Light outlet | Direct |
Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
Total harmonic distortion | 19 |
Rated life time L70/B50 at 25 °C | 70000 h |
Rated life time L80/B10 at 25 °C | 55000 h |
Degree of protection (IP) | IP65 |
Impact strength | IK08 |
Protection class | I |
Rated ambient temperature according to IEC 62722-2-1 | -30-50 °C |
Max. system power | 80 W |
Colour of light | White |
Colour temperature | 6500-6500 K |
Colour rendering index CRI | 80-89 |
Luminous flux | 10000-10000 lm |
Rated luminous flux according to IEC 62722-2-1 | 10000 lm |
Power factor | 0.9 |
Width | 250 mm |
Height/depth | 55 mm |
Length | 335 mm |
Type of wiring | Ending |
Number of poles | 3 |
Connection type | Other |
Filament test according to IEC 60695-2-11 | 650 °C - 30 s |
Luminaire efficacy | 125 lm/W |
Photobiological safety according to EN 62471 | RG1 |
Suitable for workplace according to EN 12464-1 | No |
Covering of the luminaire with thermally insulating material possible | No |
Colour consistency (McAdam ellipse) | SDCM5 |
Last viewed
Residual current device outlet, flush IP20, Jussi
Kalei nut
Terminal block 2216 series with push-button 2 conductor GNYE TOPJOB® S
Lighting rail T-component CTA3C, Unipro
Serrated lock washer/disk, externally serrated, type A
Hexagonal bolt, full thread
Wall bracket VK3 hot dip galvanised, Meka
Blind rivet flange head open
Circuit breaker
Slotted screw cylinder head DIN 84