Flange bolt, hexagon head, equivalent to MBN standard
MBN 10105, steel 10.9, fine thread starting from M12. Silver coloured zinc-flake coating as per DBL 9440.40 (type C ≙ partial thread).
FLANGE BOLT MBN10105 10.9 ZFS M14X1,5X40
With registration you can access the Würth Elektro online shop selection.
Protective coating
DBL 9440.40 accordant (silver coloured zinc-flake coating with lubrication integrated into sealing, chromium (IV) free) > VDA 235 – 104.42
Corrosion resistance
- ≤ M8 – approx. 480 h, no base metal corrosion as per DIN EN ISO 9227 – NSS
- ≤ M10 – approx. 720 h, no base metal corrosion as per DIN EN ISO 9227 – NSS
The corrosion resistance values herein apply to DIN EN ISO 9227-NSS (salt spray tests) accordant corrosion tests no earlier than 24 hours from the start of the coating (i.e., prior to sorting, packaging, transporting, and/or assembly). Resulting from unavoidable handling and assembly, the values may diminish.
In most cases, the corrosion resistance values provided by salt spray tests cannot be applied in real assembly and use conditions. When planning the connection and choosing a suitable corrosion protection coating, the materials connected, any coatings, and environmental conditions during use must be taken into account.
Friction coefficient
μ tot = 0.09 – 0.14 (VDA 235 – 101)
Flange screws reduce the risk of pre-tension loss caused by contact area setting. Compared to normal hex screws (without a flange), the surface pressure under the screw head during tightening is low, as the force is divided onto a wider area.
Benefit:
- Less setting required due to fewer parts to be connected compared to connections using washers.
- The concave washer presses against the contact surface, increasing the elasticity of the connection. This counteracts setting and creeping movements and generally also pre-tension loss.
Matching nuts
Hex nut with flange and clamping piece MBN 13032, steel 10, zinc-flake coating, item number: 026391 ...
Datasheets(X)
Thread type x nominal diameter | MF14 |
Length | 40 mm |
Type description | M14X1,5X40 |
Material | Steel |
Surface | Flake zinc silver |
DIN | 6921 |
ISO | 4162 |
Product weight (per item) | 87.000 g |
Last viewed
Lighting rail cover plate CP3, Unipro
Installation cable MMJ
Flangeless Press-Sert
Thread-forming bushing WECLS
Plastic cabinet Cubo O
Terminal block 2206 series with push-button 3 conductor GNYE TOPJOB® S
Alarm contactor with short-circuit alarm MS
Mount terminal block 221 WAGO
Flange nut, locking teeth
Terminal saddle PPK