Welcome to Würth Elektro For trade customers only

Flange bolt, hexagon head, equivalent to MBN standard

MBN 10105, steel 10.9, fine thread starting from M12. Silver coloured zinc-flake coating as per DBL 9440.40 (type C ≙ partial thread).
FLANGE BOLT MBN10105 10.9 ZFS M14X1,5X50

Art.-no. 026311450
EAN 6438190749012
-
Flange bolt, hexagon head, equivalent to MBN standard

Art.-no. 026311450

-
Quantity
PU
x 100

Show availability at another Center
Exclusively for trade customers

With registration you can access the Würth Elektro online shop selection.

Protective coating


DBL 9440.40 accordant (silver coloured zinc-flake coating with lubrication integrated into sealing, chromium (IV) free) > VDA 235 – 104.42



Corrosion resistance


  • ≤ M8 – approx. 480 h, no base metal corrosion as per DIN EN ISO 9227 – NSS

  • ≤ M10 – approx. 720 h, no base metal corrosion as per DIN EN ISO 9227 – NSS


The corrosion resistance values herein apply to DIN EN ISO 9227-NSS (salt spray tests) accordant corrosion tests no earlier than 24 hours from the start of the coating (i.e., prior to sorting, packaging, transporting, and/or assembly). Resulting from unavoidable handling and assembly, the values may diminish.


In most cases, the corrosion resistance values provided by salt spray tests cannot be applied in real assembly and use conditions. When planning the connection and choosing a suitable corrosion protection coating, the materials connected, any coatings, and environmental conditions during use must be taken into account.



Friction coefficient


μ tot = 0.09 – 0.14 (VDA 235 – 101)

Notice

Flange screws reduce the risk of pre-tension loss caused by contact area setting. Compared to normal hex screws (without a flange), the surface pressure under the screw head during tightening is low, as the force is divided onto a wider area.



Benefit:


  • Less setting required due to fewer parts to be connected compared to connections using washers.

  • The concave washer presses against the contact surface, increasing the elasticity of the connection. This counteracts setting and creeping movements and generally also pre-tension loss.


Matching nuts


Hex nut with flange and clamping piece MBN 13032, steel 10, zinc-flake coating, item number: 026391 ...

Product information

Würth Elektronik Oy Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Thread type x nominal diameter x pitch (d)

M14 x 1.5

Length (l)

50 mm

Head diameter (d)

29.9 mm

Head height (k)

12.8 mm

External drive (s)

WS21

Pitch

1.5 mm

Standards

MBN 10105

Material

Steel

Property class

10.9

Surface

Flake zinc silver

RoHS-compliant

Yes

Corrosion protection period

720 h

Head type

Hexagon head with flange

Drive type

Outer hexagon

Thread type

Metric thread

Thread form

Fine pitch thread

Thread design

Full thread

Product class

A

Area of application

Utility vehicle construction

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Elektronik Oy Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information