Press-in screw WEFH4
FLUSH HEAD STUD WEFH4 A2/400 M3X18
With registration you can access the Würth Elektro online shop selection.
Shaping press-in screw WEFH4 is an externally threaded fastening element mounted in thin plates with compression.
The thread and serration in the press-in screw’s head shape the thin plate material,
ensuring a durable hold.
• Easy compression installation.
• High torque tolerance.
• Neat connection.
• Even opposite connection end.
To ensure proper fastener operation, it must always be harder than the plate it is installed in.
400 series stainless steel fasteners are designed for hard (max. 92 HRB) plates.
However, do not use if the final product:
• requires non-magnetic fasteners
• is exposed to temperatures over 149 °C
• is exposed to corrosive substances.
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 18 mm |
Min. plate thickness | 1 mm |
Nominal diameter | 3 mm |
Thread type | Metric thread |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Circuit board support TRMSCBSM
Long connector WMT UC EG Electro deposited, Meka
Installation conductor H07V2-K MKEM 90
CABLE MARKER STRIP 4.0-6.0 MM2 WIC3
Office luminaire Linear IndiviLED Direct
Hexagon socket screw, cylinder head
Applicator tool CAB3
Hexagon screw, full thread
Box cover AK11
Lighting rail X-component CXA3, Unipro