Press-in screw WEFH4
FLUSH HEAD STUD WEFH4 A2/400 M3X6
With registration you can access the Würth Elektro online shop selection.
Shaping press-in screw WEFH4 is an externally threaded fastening element mounted in thin plates with compression.
The thread and serration in the press-in screw’s head shape the thin plate material,
ensuring a durable hold.
• Easy compression installation.
• High torque tolerance.
• Neat connection.
• Even opposite connection end.
To ensure proper fastener operation, it must always be harder than the plate it is installed in.
400 series stainless steel fasteners are designed for hard (max. 92 HRB) plates.
However, do not use if the final product:
• requires non-magnetic fasteners
• is exposed to temperatures over 149 °C
• is exposed to corrosive substances.
Datasheets(X)
 | |
Thread type x nominal diameter | M3 |
Length | 6.0 mm |
Min. plate thickness | 1.0 mm |
Nominal diameter | 3 mm |
Thread type | Metric thread |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
EMC LOCKNUT MS PG EMC, brass nickel plated
Terminal shroud OT Tall grey 1x1 pole.
Hose clamp ABA Original, W5
Connection unit CCU3A, Unipro
Defogger Adax Neo
Cable routing conduit with two accessory holes plastic, Inform
Nylock nut, low profile, clamping piece (non-metal insert, ring)
Hexagon socket screw, cylinder head
Installation conductor H05V2-K MKJ 90
Three-phase residual current device IP44, electric power