Press-in screw WEFH4
FLUSH HEAD STUD WEFH4 A2/400 M4X30
With registration you can access the Würth Elektro online shop selection.
Shaping press-in screw WEFH4 is an externally threaded fastening element mounted in thin plates with compression.
The thread and serration in the press-in screw’s head shape the thin plate material,
ensuring a durable hold.
• Easy compression installation.
• High torque tolerance.
• Neat connection.
• Even opposite connection end.
To ensure proper fastener operation, it must always be harder than the plate it is installed in.
400 series stainless steel fasteners are designed for hard (max. 92 HRB) plates.
However, do not use if the final product:
• requires non-magnetic fasteners
• is exposed to temperatures over 149 °C
• is exposed to corrosive substances.
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 30.0 mm |
Min. plate thickness | 1.0 mm |
Nominal diameter | 4 mm |
Thread type | Metric thread |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Spiral binding, cable protector, standard
Crimp sleeve WEBSOS
Cable channel PVC, cut-off groove, Legrand
Valena Life with Netatmo awake/sleep switch
Installation conductor H07V2-K MKEM 90
Signal cable MMO
Cable marker AR1MB01
Cylindrical pin, unhardened Rounded ends
Floodlight Floodlight PFM, IP65
Circuit board support TRMDLSP3