Press-in screw WEFH4
FLUSH HEAD STUD WEFH4 A2/400 M4X6
With registration you can access the Würth Elektro online shop selection.
Shaping press-in screw WEFH4 is an externally threaded fastening element mounted in thin plates with compression.
The thread and serration in the press-in screw’s head shape the thin plate material,
ensuring a durable hold.
• Easy compression installation.
• High torque tolerance.
• Neat connection.
• Even opposite connection end.
To ensure proper fastener operation, it must always be harder than the plate it is installed in.
400 series stainless steel fasteners are designed for hard (max. 92 HRB) plates.
However, do not use if the final product:
• requires non-magnetic fasteners
• is exposed to temperatures over 149 °C
• is exposed to corrosive substances.
Datasheets(X)
 | |
Thread type x nominal diameter | M4 |
Length | 6 mm |
Min. plate thickness | 1 mm |
Nominal diameter | 4 mm |
Thread type | Metric thread |
Material | Stainless steel A2 |
Surface | Uncoated |
Last viewed
Broaching standoff WEKFE
Spacer screw SIUL ZN
Plastofast, flat round pan head
Lighting rail adapter A100, Unipro
Blind rivet Domed head Multifar
EMC LOCKNUT MS PG EMC, brass nickel plated
Motor protection switch MS116
Cable tie lockable natural TRLWS 2A
Floodlight Floodlight PFM Asymetric, IP66
Timer for controlling melting mats