Heat shrink tubing HA67
HEATSHR TUB. BK 6:1 88,9/17,1 HA67 1,2M
HellermannTyton
With registration you can access the Würth Elektro online shop selection.
- Strong-walled, adhesive shrink plastic tubing, shrink ratio 6:1
- The thermoplastic adhesive on the inside creates a liquid-tight installation
- The strong-walled structure withstands impacts and abrasion as well as mechanical stress
- Halogen free
- The series’ high shrink ratio reduces the number of model sizes needed
- Supplied in length 1.22 m
Type | Heat-shrink |
Model | Thick-walled |
Shrink rate | 6:1 |
Inner diameter before heat-shrink | 88.9 mm |
Inner diameter after heat-shrink | 17.1 mm |
Nominal diameter inch | Other |
Wall thickness after shrinking | 4.8 mm |
Length | 1.22 m |
Operating temperature | -55-110 °C |
Colour | Black |
Material | Crosslinked polyolefin (XLPO) |
Halogen free | Yes |
With inner glue | Yes |
Printable | No |
UL approval | No |
E-number Finland | 5237875 |
Brand | HellermannTyton |
Datasheets(X)
Last viewed
Motor protection switch MPX3 32H
Surface mounting frame downlight Downlight Slim DN
Auxiliary contactor block CTXMINI
Serrated lock washer/disk, externally serrated, type A
Serrated lock washer, internally serrated, type J
Auxiliary contactor block CTX22
Rectangular flexible slotted cable trunking
Cable trunking, screw mounting, WDK
Downpipe Instal
Hexagon nut, low profile, fine thread