Sauna luminaire Heatwall
HEATWALL BS 2700K
HIDE-A-LITE
With registration you can access the Würth Elektro online shop selection.
Soft and pleasant lighting creates a cosy atmosphere in the sauna. Heatwall is a beautiful, clean and simple LED luminaire for the sauna. It has an IP65 and IK10 rating. Wall luminaire that is good to look at and is also suitable for installation behind a lampshade. The rear element of the Heatwall is cast aluminum and the finish is brushed steel. It has an opal diffuser made of heat-resistant plastic. Complete with integrated phase dimmable driver for direct connection to 230V.
Datasheets(X)
Rated luminous flux according to IEC 62722-2-1 | 515 lm |
Colour temperature | 2700-2700 K |
Type of wiring | Suitable for through wiring |
Outer diameter | 132 mm |
Dimming phase cut-on | Yes |
Dimming DALI | No |
Dimming with push-button | No |
With movement sensor | No |
Max. system power | 7.5 W |
Light sharing | Symmetric |
Housing colour | Stainless steel |
Housing material | Aluminium |
Material cover | Plastic, opal |
Type of grid | None |
Voltage type | AC |
Nominal voltage | 220-240 V |
Type of control gear | LED operating device current-controlled |
With control gear | Yes |
Dimming 0-10 V | No |
Dimming 1-10 V | No |
Suitable for workplace according to EN 12464-1 | No |
Dimming DMX | No |
Dimming DSI | No |
Dimming potentiometer (integrated) | No |
Dimming GPRS | No |
Dimming LineSwitch | No |
Dimming manufacturer's proprietary system | No |
Dimming mains voltage modulation | No |
Dimming phase cut-off | Yes |
Suitable for light line configuration | No |
Dimming programmable | No |
Dimming RF | No |
Dimming Sine Wave Reduction | No |
Dimming Touch and Dim | No |
Dimming Zigbee | No |
Lamp type | LED not exchangeable |
Dimming depending on control gear | No |
No dim function | No |
Light distributor | None |
Lamp holder | Other |
Beam angle | Extreme wide beam >80° |
Light outlet | Direct |
Energy efficiency class of the built-in lamp | A++, A+, A (LED) |
Degree of protection (IP) | IP65 |
Impact strength | IK10 |
Protection class | I |
Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24 | No |
Suitable for emergency lighting | No |
With light source | Yes |
With light sensor | No |
Covering of the luminaire with thermally insulating material possible | No |
With air slots | No |
Suitable for wall mounting | Yes |
Colour of light | White |
Suitable for suspended mounting | No |
Colour rendering index CRI | 90-100 |
Height/depth | 70 mm |
Suitable for built-in mounting | No |
Suitable for surface mounting | Yes |
Suitable for number of light sources | 1 |
Number of poles | 2 |
Conductor cross section | 2.5 mm² |
Connection type | Screwed terminal |
E-number Finland | 4143555 |
Brand | HIDE-A-LITE |
Last viewed
Cable tie with stand natural TRSHK-M
Blind rivet domed head open
Electronic ballast CV-DR-PFM
Surface outlet box Red Range Q 4-L IP20, plastic
Floodlight Floodlight PFM Asymetric, IP66
Illuminated selector switch Harmony
Lighting rail adapter A100, Unipro
Flush-mounted switch 10AX – 250V IP20 Valena Life
LED lamp HQL LED PRO G6 E27 - 2000lm
Flush-mounted outlet IP21 diagonal Exxact