Hexagon screw, partial thread
ISO 4014, steel 8.8, hot-dip galvanised
HEX BOLT ISO 4014 8.8 HDG M16X150 ISO FI
With registration you can access the Würth Elektro online shop selection.
- Manufactured with a thread undersize in tolerance class 6AZ (thread play) before coating (DIN EN ISO 10684).
- Bolt meets ISO standard requirements after hot-dip galvanising
- The bolts must not be used with nuts that have oversize threads. Failure to comply may cause screw-in issues and connection failure
ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22.
Datasheets(X)
 | |
Thread type x nominal diameter (d) | M16 |
Length (l) | 150 mm |
Head height (k) | 10 mm |
External drive (s) | WS24 |
Material | Steel |
Property class | 8.8 |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Head type | Hexagon head |
Drive type | Outer hexagon |
Thread type | Metric thread |
Thread form | Standard metric thread |
Thread design | Partial thread |
Shank diameter (ds) | 16 mm |
Thread length (metric thread) (b) | 44 mm |
Product class | A |
Notice | ISO 4014 replaces DIN 931 | There is some similarity | Nominal dimensions expanded | Width across flats changed for M10, M12, M14, and M22. |
Last viewed
Heat shrink hose with adhesive: FRG8003
Motor protection switch MS116
Signal cable FLEX-OZ
Downlight surface-mounted IP65 Downlight Surface
Cylindrical pin, unhardened
Plastofast, pan head
Lighting rail T32, Unipro
Lighting rail adapter A75, Unipro
Circuit board support TRTCBS
Motor protection switch MPX3 32H