Hexagon nut
DIN 934, steel I6I/I8I zinc plated, blue passivated (A2K)
HEXAGON NUT DIN 934/8 ZN M8
With registration you can access the Würth Elektro online shop selection.
DIN 934 compliant hexagon nuts do not support DIN EN ISO 898-2 compliant test loads.
- To differentiate, the hardness class designation has vertical bars before and after the hardness code.
DIN 934 has been replaced with standard ISO 4032/8673. There is no similarity (nominal diameter changed | some nut heights changed | width across flats changed for M10, M12, M14, M22 | ISO 4032 for standard thread | ISO 8673 for fine thread).
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M8 x 1.25 |
Thread type x nominal diameter (D) | M8 |
Height (m) | 6.5 mm |
External drive (s) | WS13 |
Standards | DIN 934 |
Material | Steel |
Property class | I8I |
Thread type | Metric thread |
Surface | Zinc plated |
RoHS-compliant | Yes |
Last viewed
Straight adapter MPCB MPX3
Flush-mounted outlet diagonal IP21 Exxact
Through standoff WESO
Neutral bar N bars with 16 mm2 pillar terminals KN
Cable tie with stand natural TRSHK-M
Enclosed industrial luminaire Damp Proof Classic, IP65
Surface-mounted junction box AP9 IP65, plastic
Charging station load management control unit EVlink Home Peak Controller 1-phase
3-phase conductor rail system MS
Motor protection switch MPX3 32H