Inductive sensor Embeddable, OsiSense
INDUCTIVE SENSOR XS118B3PAM12
SCHNEIDER ELECTRIC
With registration you can access the Würth Elektro online shop selection.
Inductive sensors from Telemecanique Sensors' Osisense series, can be used to detect the presence of metal. This type of product is used in almost all automated devices where it is necessary to determine whether an object is present or not, such as the arm of a robot.
Datasheets(X)
Length of sensor | 50 mm |
Diameter sensor | 18 mm |
Mechanical mounting condition for sensor | Concise |
Switching distance | 8 mm |
Suitable for safety functions | No |
Type of switch function | Normally open contact |
Type of switching output | PNP/PNP |
Type of electric connection | Connector M12 |
Number of semiconductor outputs with signalling function | 1 |
Number of contact energized outputs with signalling function | 0 |
Number of protected semiconductor outputs | 0 |
Number of protected contact energized outputs | 0 |
Type of actuation | Metallic Target |
Type of interface | None |
Type of interface for safety communication | None |
Construction type housing | Cylinder, screw-thread |
Coating housing | Nickel-plated |
Cascadable | No |
SIL according to IEC 61508 | None |
Performance level according to EN ISO 13849-1 | None |
Max. output current at protected output | 200 mA |
Supply voltage | 12 - 24 V |
Rated control supply voltage DC | 12 - 24 V |
Voltage type | AC/DC |
Switching frequency | 1000 Hz |
With monitoring function downstream switching devices | No |
Housing material | Metal |
Compression-resistant | No |
Explosion safety category for gas | None |
Explosion safety category for dust | None |
Interference resistance to magnetic fields | Immune against magnetic DC- and AC-field |
E-number Finland | 2720553 |
Brand | SCHNEIDER ELECTRIC |
