Installation cable MMJ
INSTALLATION CABLE MMJ 5X16S
With registration you can access the Würth Elektro online shop selection.
For indoor and outdoor stationary surface and flush mounting.
Suited for installation in stonework grooves with attention to the instructions: manual D1 -06 section 522.11, as well as figures 522.2 and 522.3. Not suited for ground installation or direct installation in concrete cast without protective tube.
Datasheets(X)
Conductor material | Copper |
Conductor surface | Bare |
Nominal cross section conductor | 16 mm² |
AWG size | 6 |
Nominal cross section conductor (AWG) | 13.3 kcmil |
Diameter conductor | 5.04 mm |
Conductor category | Class 2 = stranded |
Conductor resistance at 20 °C | 1.15 Ohm/km |
Number of cores | 5 |
Twisted cores | Yes |
Material core insulation | Polyvinyl chloride (PVC) |
Specification core insulation | Other |
Core identification according to HD 308 S2 | Yes |
Identification/coding colour core | Other |
Core identification | Colour |
Core colour | Several |
With protective conductor | Yes |
Max. conductor temperature | 70 °C |
Screen | No |
Drain wire | No |
Protective barrier | None |
Armouring/reinforcement | None |
Material outer sheath | Polyvinyl chloride (PVC) |
Colour outer sheath | White |
Cable geometry | Round |
Reaction-to-fire according to EN 13501-6: Class | Eca |
Reaction-to-fire according to EN 13501-6: Acidity | None |
Halogen free according to EN 60754-1/2 | No |
Flame retardant | According to IEC/EN 60332-1-2 |
Low temperature resistant according to EN 60811-504+505+506 | Yes |
Oil resistant according to EN IEC 60811-404 | No |
Outer diameter approx. | 25 mm |
Min. permitted bending radius, stationary application/permanent installation | 75 mm |
Permitted cable outer temperature during assembling/handling | -15-70 °C |
Permitted cable outer temperature after assembling without vibration | -15-70 °C |
Nominal voltage U0 | 450 V |
Nominal voltage U | 750 V |
Shape of conductor | Round |
E-number Finland | 0406947 |
