Instrumentation cable KJAAM HF
INSTR. CABLE KJAAM-HF 4X(2+1)X0,5+0,5
HELKAMA
With registration you can access the Würth Elektro online shop selection.
Cable for instrumentation, process control and audio systems. KJAAM is intended for the transmission of digital and low-level analogue signals. The cable provides excellent protection against electromagnetic interference.
IEC 60754-2
Datasheets(X)
Nominal cross section conductor | 0.5 mm² |
Conductor material | Copper |
Number of cores | 8 |
Conductor surface | Tinned |
Category | None |
Diameter conductor | 0.9 mm |
Material outer sheath | Other |
Conductor category | Class 2 = stranded |
Number of stranding elements | 4 |
Stranding element | Pairs |
Material core insulation | Other |
Specification core insulation | Polyethylene (PE) |
Core identification according to HD 308 S2 | No |
Core identification | Colours and numbers |
Screen over stranding element | Foil |
Stranding | Bundle |
Screen over stranding | Foil |
Longitudinal water blocking cable | No |
Radial water blocking cable | No |
Suitable for underground installation | No |
Protective sheath | Al/PE |
Specification material outer sheath | Other |
Colour outer sheath | Grey |
Armouring/reinforcement | None |
Cable geometry | Round |
Reaction-to-fire according to EN 13501-6: Class | Dca |
Reaction-to-fire according to EN 13501-6: Smoke production | s2 |
Reaction-to-fire according to EN 13501-6: Flaming droplets/particles | d1 |
Reaction-to-fire according to EN 13501-6: Acidity | a1 |
Halogen free according to EN 60754-1/2 | Yes |
Halogen free according to EN IEC 60754-2 | Yes |
Flame retardant | According to IEC/EN 60332-1-2 |
Low smoke (according to EN 61034-2) | Yes |
Low smoke according to EN IEC 61034-2 | Yes |
Oil resistant according to EN IEC 60811-404 | No |
Oil resistant (acc. IEC 60811-404) | No |
Insulation integrity in accordance with IEC 60331 | No |
Circuit integrity | None |
Outer diameter approx. | 10 mm |
Min. permitted bending radius, moving application with forced guidance | 90 mm |
Min. permitted bending radius, moving application/free movement | 90 mm |
Min. permitted bending radius, stationary application/permanent installation | 60 mm |
Permitted cable outer temperature during assembling/handling | -5-70 °C |
Permitted cable outer temperature after assembling without vibration | -5-70 °C |
UV resistant | Yes |
Certified for shipboard application | No |
Suitable as telephone cable | No |
Suitable as computer data cable | No |
Suitable as signalling cable | Yes |
Weight | 120 kg/km |
E-number Finland | 0245395 |
Brand | HELKAMA |
Last viewed
Cylindrical pin, hardened
Battery cable HI-FLEX
Flush-mounted switch 10AX – 250V IP20 Valena Life
Car conductor RX-KB
Taptite DIN 7500-C, cylinder head, TX, thread-rolling screw
L-bend for DLP-S cable channel
Power bus bar MPCB MPX3
Box support with fastening tape Multifix KT66
Hexagon nut
Motor protection switch MS116